★ Roll-fed type, label in-fed from label station is conveyed to label in-feed roller through label guide roller. Sensors will check I-MARK of label automatically when label reaches label in-feed roller. As soon as the position of I-MARK is confirmed, Encoder will adjust the operation speed of label in-feed roller and then appoint the label cutting position. Labels passing through label supplying roll and then go into label cutting part for cutting, and then the labels will be sent into vacuum label disk. When transducer checked the labels in vacuum label roll, the labels will be sent to glue drum for gluing;
★ The bottles on conveyor arranged by planet wheel, glued labels were stickled to bottles in bearing position, and then the labels will be stickled well with the effect synchronization belt;
>>>Characters:
★ Include such mechanisms as label-providing, belt-conveying, label-cutting, wheels-attaching, vacuum-adsorbing, hot sol-conveyance
★ Hot sol providing machine is made in a hundred million Hertz. VAC and PUMP don’t start working unless the hot sol machine gets to designed temperature.
★ Vacuum label disk for label-pasting and label-adsorbing and vacuum manifold at the lower part of drum and cutter, made of heat & wear resistant material can be prevent from high heat; wrinkle process added can reduce label rub and friction;
>>>Safety:
① overload running safety equipment attached on driving zone
② stopper for abnormity operation of in-feed star wheel
③ no bottle fed (sensor check)
④ overload for bottle fed (sensor check)
⑤ no bottle no labeling
>>>Main construct:
1) conveyor part
2) in feed star wheel part
3) label station
4) vacuum drum part
5) driving part
6) hot melt applicator
7) glue roller part
8) side belt part
9) label cutting part
10) label guide roller part
11) frame part
12) air and lubricate part
13) electric part
